1 / 3
Bosch GSR12 cordless drill anti tip foot — zdjęcie 1
1 / 3

Bosch GSR12 cordless drill anti tip foot

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple anti tip foot for the Bosch cordless drill

Ocena
0 / 5
Polubienia
3
Pobrania
10
Wydruki
0
Wyświetlenia
95
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

A far away from perfect anti tip foot. But does the trick. Without the foot I tipped over my drill countless times so I endet up laying it down flat each tipe I put it away between drills.

With this stand I finale am able to place it on the bench upstanding.

IMPORTANT! You need to carefully drill two 3mm holes into the outer plastic of the battery. You can use the part as drilling template. Needs two M3x6 screws to hold it in place. Do this at your own risk.

You may have to rotate it on the print bed. Print in PLA, ABS, Nylon or similar.