Adventure Force Boxer Pro Extended Fixed Stock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A extended version of the stock for the adventure force boxer pro. It slides on the existing stock bars and is fixed.
- Ocena
- 4 / 5
- Polubienia
- 20
- Pobrania
- 37
- Wydruki
- 1
- Wyświetlenia
- 617
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a slightly extended version of the stock for the adventure force boxer pro. It slides over the pre-existing stock bars and then uses two pins and 2 toy screws to lock it into place. You will need to cut the existing stock bars so they are flat and don't have the mounting point for the original stock butt plate. Also be sure to fully extend both stock bars before installing the new stock.
I've also included a pin-less version of the stock (mk3.1). This one lacks the pin holes and can be glued onto the existing stock bars with epoxy or super glue.
In terms of printing:
- Print the stock with the bars facing upwards, butt plate on the build plate.
- Stock will not need supports
- Print the stock at 4-5 walls, 25% infill, and gyroid pattern
- Print the pins as they are. You will need two sets.
- Print pins at 4 walls, 25% infill, gyroid pattern