Foot for Fisher 400-C Preamplifier
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement foot for a late 1950's Fisher 400-C preamp. Probably used on other model Fisher gear as well. Someone told…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacement foot for a late 1950's Fisher 400-C preamp. Probably used on other model Fisher gear as well.
Someone told me the foot was just a tiny bit tall. Given all the variables in printers, and the age of the equipment (60 or so years), I can see how that could happen. Just place the foot, top side down, on a piece of sandpaper and lightly sand it. Test fit a few times until it's perfect.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.20
Infill:
15%
Category: Electronics