1 / 2
Graflex Speed Graphic Lens Board 1.7 inch hole
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a lens board for Speed Graphic allowing mounting of a lens with a 1.66 inch diameter. It's slightly oversized…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 429
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
This is a lens board for Speed Graphic allowing mounting of a lens with a 1.66 inch diameter. It's slightly oversized to let the threads screw themselves into the plastic. My lens came without a flange. My lens is a Busch's Rapid Symmetrical F8 but should work fine with any lens of the same size.
Need a different hole size? Use the customizer on my openSCAD model.
Category: Camera