UV Curing Chamber
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Buy one of those lights & turntables from amazon and install into this. I bought https://www.amazon.com/dp/B083ZFH24H/…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 371
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Buy one of those lights & turntables from amazon and install into this. I bought https://www.amazon.com/dp/B083ZFH24H/
Glue/Weld the two chamber pieces together. Use 1.75 filament for hinge.
I'm still in the process of printing/building this so pics to come.
Chamber prints in 4 pieces. Top, Bottom, Door, and Light Fixture. I included the full chamber solidworks part for editing.
Chamber is 250mm high. Turntable shouldn't take up more than ~45mm which leaves a bit more than 200mm of height space. Diameter is 150mm. Door is 130mm wide. Should fit most parts printable on a base SLA printer.
Pieces are not oriented correctly because I still haven't learned how to design on the correct plane... Should be easy to figure out the best orientation.
Print Settings
Printer:
Da Vinci 1.0
Supports:
Yes
Resolution:
.2
Infill:
30%
Category: 3D Printer Accessories