1 / 5
One-Up / Two-Up Bowden Extruder w/ Built in Tensioner — zdjęcie 1
1 / 5

One-Up / Two-Up Bowden Extruder w/ Built in Tensioner

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Just a slightly edited version of macattak's carriage. I had belt sag and didn't like using tensioners so I came up…

Ocena
0 / 5
Polubienia
0
Pobrania
7
Wydruki
0
Wyświetlenia
102
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Share Alike

Just a slightly edited version of macattak's carriage. I had belt sag and didn't like using tensioners so I came up with this design, works great for me. You lose the top 4 holes, but I didn't use those anyway.

Update: Added an edited ubis hotend clamp that goes with this carriage. It was modified to use 20mm m3 screws (those are the longest I have).

Also, just so it's clear, all credit for these parts goes to MacAttak, I just tweaked them to my liking. Original parts here: http://www.thingiverse.com/thing:245617

Category: Other

Tagi