DKS Basic Differential
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DKS Basic differential
- Ocena
- 3 / 5
- Polubienia
- 15
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 526
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Printed Cormangos cars with the DKS-Basic chassis. Unfortunately this chassis has no differential onboard. Fortunately there is one from the Open source Project OpenRC F1. Use the gears, especially the flat one need an bigger inside to fit the DKS drive shaft. I used the Prusa Slicer function negative volume, take the Abzugskörper Differenzial and subtract it from the Diff01 gear the flat one with the d-shaped opening. I designed various length drive shafts and wheel connectors for the different models, just drop the original shafts in the slicer and you know the right size to pick. The drive shaft number and the the Sechskant number / length is in the name.
Printed in PETG/easy ABS as this seem sufficient, use more infill and add additional walls for strength.