Honda CRX Brake Proportioning Valve Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounts adjustable proportioning valves to the 2nd gen Honda CRX
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 134
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This bracket allows you to use a Wilwood Combination Brake Proportioning Valve (260-11179) on a Honda CRX using the existing mount studs for the master cylinder. It likely would fit many Honda cars of this era, but I've only tested with the CRX.
Note: 3D print this part to test fitment. For the actual part, I recommend ordering a sheet metal version from SendCutSend. You can use this STL to generate that.
Make sure to install this in front of the master cylinder (towards the front of the car) NOT in between the master cylinder and brake booster. That would affect pedal travel and could cause serious brake issues.
K-swaps (K20, K24) require remounting of the stock brake proportioning valve. I saw this as an opportunity to incorporate an adjustable valve. This also requires re-running all lines for the car as the valve is not designed for cross-systems like the Honda OEM system.
As with all brake upgrades, make these changes at your own risk.