Flywing H1 GPS Mount - Align TB60 / SAB RAW 580
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For installation of the FW H1 system onto a Trex TB60, SAB RAW 580 or any other helicopter with a 30mm tail boom.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Use double sided tape to stick the FLYWING H1 GPS Unit to the top of the bracket. Two cable ties are inserted into the two holes securing the bracket to the tail boom.
As an alternative to the double sided tape screw holes are provided using M2 screws to attach the
H1 GPS - replacing the original housing screws. (Longer screws needed)
Tailboom diameter: 30mm
Support my work: All of my models are available for free. If you'd like to show your appreciation, consider Buying Me A Coffee.
Filament: PLA
Change log:
Rev.01: I've also designed a new housing for the H1 GPS unit, this makes for a smaller footprint - Same width as the tail boom, and a different look. It require disassemly of the original housing. (Four screws) It can also fit other GPS units of similar size or smaller and is available here.
