Brompton light mount using stock reflector arm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bromnpton light mount for lights with rubber O-ring or silicone strap mount using stock reflector arm.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 895
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
If you buy a new Brompton bicycle or bought some time ago, chances are that you have a front circular reflector installed. You can unscrew the reflector and replace it with this print so you can use any light that uses rubber O-ring or silicone strap mount.
This print retain the original reflector arm which is quite stiff and won't shake much during ride. It also save your time by not requiring you to remove caliper brake in order to replace the entire light mount because many are designed that way.
All you need is
1 - M5 10-12 mm bolt
1 - M5 nut
2 - M5 washers if you feel the mount isn't stable but I didn't use one during my installation and it is fine.
Print in PLA is fine but if you want you can use PETG or ABS. I was planning to use PCCF but tested on PLA first to see how well the material and positioning works. So far it's working great so I'm still keeping this one.
I printed with 4 walls and 10% infill as there aren't much space for infill any way more walls makes the model stiffer which is great because you don't want your light shaking when riding.
This is a remix of Brompton Front Light Adaptor by anthony_zyj - Thingiverse I shorten the arm and make it sit lower so that the top of the light won't rub against the bottom of your front bag.