GEPRC Crocodile LC75 Tail Mount for M10Q GPS v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a tail mount that slides into the original GPS mount and moves the GPS/compass away from the battery cables.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
This is a tail mount that slides into the original GPS mount and moves the GPS/compass away from the battery cables. Otherwise you cannot use the compass that comes with the GPS as the current running through the main power cables will completely overpower the compass, it will never calibrate successfully.
The bracket was made to fit a Matek M10Q-5883 GNSS/Compass module (the 20mm form factor) and includes a viewport for the LED status light.
This is actually v2 of the tail mount, it has been upgraded to have two antenna ports for HD (I am using walksnail now), and to look nicer overall.
Print in ABS, ideally. PLA will also work.