wax catcher ring glass candle drip protector christmas advent
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this protection ring secures your table from dropping candle wax
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
one of my family members asked me to reproduce his original glass protector rings for his christmas candles (because over the years some of them broke).
it protects the underlaying table from dropping wax.
first i tried to use clear (completely transparent) PETG, but the results that i reached were not satisfying enough (at least for me ;-)).
so after a while i switched to use white ASA instead.
if you print it in vertical position (standing on the side) you only need less support material and the surface stays nice and smooth.
I printed these rings on my Bambu Lab P1S with the following settings:
Material: ASA from Anycubic in White
Nozzle-Temp: 270°C
Bed-Temp: 100°C
Support: Yes (tree)
Nozzle: 0,4mm
Layer Height: 0,2mm
Infill: 15%
Wall Loops: 2
Wall Generator: Arachne
Bottom and Top Shell Layers: 4
Print Speed: 200mm/s
Outer Wall Speed: 150mm/s
Initial Layer Speed: 50mm/s
Fan Speed: 30%
Brim: 10mm