1 / 1
Scrubber Droid Parts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A collection of parts I designed for my Scrubber droid. Includes corners, sides and nuts for tubing.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
A collection of parts I designed for my Scrubber droid. Includes corners, sides and nuts for tubing.
- Corners: One file is used for all four corners. Reverse model to print alternate corners.
- Side Panel: This is the long lower panel. Has holes for the included side tubes and a embossed area showing where to attach the greebles for decoration.
- Side Plates: One solid plate, and one plate with a hole for the Pipe Adapter.
- Pipe Adapters: Hollow bolts for holding hoses from top to side of Scrubber droid. A longer adapter for the top and a shorter one for the side.
- Side Tubes: Decorative pipes in three styles. One tube is needed for each side of the Scrubber droid.
I used a semi-clear tube for my hoses so I could install LED light strips inside the tubes for lighting effects. The tubes have an outer diameter (OD) of 5/8 in (16mm). The inner diameter of the tubes is 3/8 in.
Nothing special about printing. Just use your normal print settings. I printed my Side Tubes in resin.