BitAxe Gamma 601 Enhanced Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an improved stand for the BitAxe Gamma 601. Added rear 40mm fan and larger base to prevent tip overs.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 186
- Wydruki
- 0
- Wyświetlenia
- 1009
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
BitAxe Gamma 601 Enhanced Stand
This is an upgraded stand designed for the BitAxe Gamma 601 miner. It improves stability and cooling compared to the original stand design.
Key features:
Larger, more stable base to prevent tip-overs.
There are two recessed areas in the base. You can add a sand/epoxy mix to these recesses to add additional weight if needed.
Integrated rear 40 mm fan mount for improved cooling. Fan is positioned directly over voltage regulator.
Under-board clearance allows use of stick-on heatsinks
Two versions included in the 3MF file:
• One supports M3 heat-set inserts for the rear fan
• One without inserts for direct mounting
(Delete the one you don’t need before printing.)
All hardware uses M3 screws.
Printed in about 2 hours on Bambu P1S. No supports needed.