Sage/Breville Espresso Cup Riser Stand

This espresso cup riser stand is designed to sit securely in the drip tray of selected Sage / Breville espresso machines, raising smaller cups closer to the portafilter spout for improved shot control, reduced splashing, and a cleaner workflow.

The original design was created specifically for the Barista Pro. Since then, the model has been expanded to include several other variants, each adjusted to match the drip tray geometry of the machines.

Important note for existing users:
The variant for the Barista Pro is unchanged from the original release.
If you have already printed it and are happy with the fit, there is no need to reprint.

Machine Compatibility

* See the Community Feedback section below if you are interested in helping

Each variant is supplied as a separate STL and is intended only for the machines listed above. Please select the variant that matches your coffee machine.

Oracle machines are planned, but I do not currently have access to them. Community assistance with measurements or test fitting would be greatly appreciated.

Features

• Custom fit for Sage / Breville drip trays

• Machine-specific variants designed for a perfect fit

• Self-locating base shaped to sit securely in the drip tray

• Raises cup height by approximately 34 mm

• Ideal for small espresso cups and shot glasses

• Single-part print — no assembly required

Print Settings

• Orientation: Print in the designed orientation (cup platform on the build plate)

• Filament: PLA (Black Overture PLA Professional shown)

• Layer Height: 0.2 mm

• Nozzle: 0.4 mm

• Infill: 15 % (Grid or Gyroid)

• Supports: Not required

Test-Fit Models (Optional)

Alongside the full riser models, I have also included small test-fit parts for each variant.

These test models consist of only the lower few millimetres of the riser and locator pegs, allowing you to:

• Quickly check drip tray fitment

• Verify locator peg depth and alignment

• Avoid committing time and filament to a full print if fitment is uncertain

If the test-fit model sits correctly and locates cleanly in your drip tray, the corresponding full riser should fit as intended.

Community Feedback

If this riser improves your espresso workflow, please consider leaving a Like or posting a Make.
Feedback from confirmed prints is particularly valuable for validating fitment on machines marked as awaiting confirmation.

For the Oracle range of machines marked as community help required, support depends entirely on community assistance. This typically involves providing measurements, reference photos of the drip tray, or validating fit with a “Test fit” model where available.

If you own one of these machines and are willing to help, please message me and I can provide guidance.

Related Model

You may also be interested in my 18g Coffee Bean Measure / Scoop (Espresso Cup Style).
It is designed to resemble a small espresso cup while providing a simple, repeatable way to portion whole beans for a typical double shot.