Abraham Lincoln 1863 hueforge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
who needs habeas corpus when you look this good?
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Project: lincoln1863.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 149.98x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
Filaments Used:
#000000 PLA+ Esun Black Transmission Distance: 0.1
#d93b90 PLA Polymaker Panchroma Magenta Translucent Transmission Distance: 5.1
#9199a4 PLA Polymaker Panchroma Grey Translucent Transmission Distance: 7
#08abfb PLA Polymaker Panchroma Cyan Translucent Transmission Distance: 5.1
#f9ed3d PLA Polymaker Panchroma Yellow Trans Transmission Distance: 7.9
#ffffff PLA+ Sunlu White Transmission Distance: 5
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Magenta Translucent
At layer #10 (0.88mm) swap to Grey Translucent
At layer #11 (0.96mm) swap to Cyan Translucent
At layer #13 (1.12mm) swap to Yellow Trans
At layer #18 (1.52mm) swap to White for the rest.