Magnetic Clasp for Easy Chain
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clasp holds chain ends securely.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 165
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Share Alike
This clasp works with @FernandoJerez' Easy Chain. It's inspired by @Rauks' magnetic anchors. This clasp uses two magnets to hold its halves together and has small hooks on the ends. The hooks do most of the work; the magnets just keep them from coming apart.
The magnets are held in place with crush ribs. You can rely on the ribs (I do) or give them a drop of superglue. There's a hole in the bottom to push the magnet back out if they're not glued.
I created these to use with my Soul Cage Housing. Check it out!
I designed this in Fusion 360. I've included the CAD model in both .f3d and .STEP formats.a
Printing
The design is optimized for 0.2mm layer height. Print with at least 2 perimeters for strength.