Dummy 13 Cloven Hoof
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A hoof foot for Dummy 13 with a trimmed ankle joint to match.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 74
- Wydruki
- 1
- Wyświetlenia
- 241
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Share Alike
Cloven hooves for Dummy 13 100% (tested up to 150%). The ankle is a trimmed version of a stiffer joint I uploaded to Printables here—similar to that one, it stays in place a bit too well and can also be difficult to get into place without additional pressure. You don't need to use the provided joint if you don't want to.
Hooves are large enough that a balanced Dummy can stand without support (here pictured next to a smooth foot, both at 150% scale). They are mirrored, but which one you place on which leg hardly matters—made for a D&D satyr character but it came out more cow-like than intended…