Upgraded Motor Mount for Apple Cider Press
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
mounts a 6.5" OD (3/4HP) face-mount motor onto a Happy Valley Ranch cider press
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 54
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
The original ⅓HP motor kept clogging on all the apples so I designed a new mount for a ¾HP motor which also leaves room for the flywheel to fit. Now the motor never stops and it can even take large whole apples very fast.
This mount is about as small as possible for such a large motor, it's about 7" in every dimension and can be printed on 3d printers as small as the Prusa Mini that I used.
You will need some hardware for this like the screws on the face plate that are like 5/16"x1¼" but most of it can just be re used off the original motor.