Apple AirPods 3 Pro Skin Enclosure (parametric with FreeCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
'Skin' enclosure for the 'Apple Airpods 3 Pro'. The enclosure is protecting the surface of the airpods case.
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 268
- Wydruki
- 2
- Wyświetlenia
- 986
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
‘Skin’ protective enclosure for the Apple AirPods Pro 3.
- two parts: upper and lower enclosure
- lanyard opening
- USB-C charger opening
- LED opening (semi-open with less material on the outside)
- Opening on the back for the hinge
Parametric FreeCAD model plus STL file provided. The STL includes both the upper and lower enclosure: use ‘split into parts’ in the slicer.
The lower part is tight enough to stay in place. For the upper part you might need to use a small piece of double-sided tape to keep it in place.
I have printed it on my Prusa Core One without any support and brim on a satin sheet, with the ‘flat’ middle part on the bed, with a 0.4 mm nozzle and 0.1 FAST DETAIL profile, using PLA.
Depending on you filament and printer, you might need to add support and brim. If your overhangs are not good, you might need to sand/smooth the inner side of the domes.