Pokemon Go Battle League Badges (keychain)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick model put together for battle league badges. Show off you are a battle league master! Tolerances are tight if…
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 246
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution
Quick model put together for battle league badges. Show off you are a battle league master!
Tolerances are tight if you print separately and assemble, but should be manageable with most printers. Might need to shave off a bit of the bottom edges with a blade. Reducing flow to 90-95% in your slicer may also help. You can print as separate pieces and snap together after printing or use merge model in Cura and print whole. I split the model so I could swap filament colors during the print. White and grey for the body. Blue/red, Black/yellow, purple/pink for each badge.
Have fun!
Category: Coins & Badges