Holder for Hue Lightstrip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is my take on how to attach a HUE Lightstrip to the wall. Has a 4,5mm screw hole to accomodate most common screws
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 41
- Wydruki
- 1
- Wyświetlenia
- 92
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
A holder for HUE Lightstrips, easy to attach to the wall. I have made them so that “normal” screws are easy to use. You can have up to 12mm diameter on the screw head and the hole in the holder is 4,5mm for easy mounting with the screw touching to much of the holder and turning it when screwing against the wall.
You can also mount this one “up side down” if it suits your needs better with the additional “tongue” in the top. See pictures for explanation.
Prints without supports.