Scabbard for Medieval Longsword - KCD - Sir Radzig Kobyla's/Henry's sword
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A scabbard to complement the nicely done sword by 3Demon
- Ocena
- 4 / 5
- Polubienia
- 74
- Pobrania
- 320
- Wydruki
- 2
- Wyświetlenia
- 1718
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
I love the Radzig's/Henry's sword model by 3Demon (although it is a little too small in the original scale), but I missed a way to protect the delicately sanded and painted blade when taking the print out to show to friends. Hence, a scabbard.
I decided not to go with the one used for this specific sword ingame and instead chose a different type with metal hardware that IMHO fits the knightly status of this weapon better. Since the original model is a little too small for a longsword, there's also one to go with a 125% upscaled sword.
A gentle fuzzy skin (as set in the 3mf) acts as an acceptable stand-in for proper leather texture which i can't apply in Fusion.
I recommend gluing some patches of velcro (the soft side) inside the mounth of the scabbard and about halfway deep to prevent clacking noise and damage.
UPDATE: Some makers reported that the scale was not right, so I updated the FINAL file. Also added "Scabbard Radzig v12" which is almost a direct Fusion Export with no modifyer bodies (might be a little too loose and have too much clearance on the "Lockets" - needs to be tested)
Or use the F3D, that should be spot-on, unless the sword was changed.