Drag Chain Mount for Tevo Tarantula
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
[Update 2] Got fed up with missing Z height. So I moved the chain behind the Z rod with a couple extensions. The X…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 471
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
[Update 2] Got fed up with missing Z height. So I moved the chain behind the Z rod with a couple extensions. The X carriage extension is for the LPA Modular X carriage at https://www.thingiverse.com/thing:2034743.
[Update] I created a shorter mount and this will give the full 200MM Z height.
Use the "Short Drag Chain X Motor Mount With Channel.stl" file.
This is a drag chain mount for the Tevo Tarantula. Drag chain is 10X20.
The X carriage mount fits on the modular X carriage from thingirob at http://www.thingiverse.com/thing:1438795.
The motor mount is designed with a channel and fits through the Z rod and motor mounts from thingirob at http://www.thingiverse.com/thing:1457449.
You will lose ~45mm of Z height with the long (original) mount w/ channel.
Holes for the drag chain are for 3mm screws.
Print Settings
Printer:
Tevo Tarantula
Rafts:
No
Supports:
No
Resolution:
.3
Infill:
100%
Category: 3D Printer Parts