1 / 3
ZMK Nice Nano 128x64 OLED Dongle Xiao BLE remix
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the wonderful model from @James_909973 Shortened it to better fit a Seed Studio Xiao BLE controller.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 37
- Wydruki
- 1
- Wyświetlenia
- 372
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Remix of the wonderful model from @James_909973
There is some extra depth left so that the USB C connector goes in deeper into the case and doesn't stick out that much. If the slack annoys you, consider gluing the controller in place.
Since I wanted to use countersunk screws, I've edited the screw holes, but flat headed screws should work as well.
I've also added some small indents for adhesive rubber feet
Print in the orientation showed in the model