Acoustic wall panel shelf for 13mm gap between vertical slats, and 13mm slat depth.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This remake is for standard acoustic wall panel with 13mm gap between the slats.
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 98
- Wydruki
- 1
- Wyświetlenia
- 645
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
I really liked the original design by NickiDotDK, but it did not fit the requirements for the make of wall panel I was due to fit on my wall. With a sample of the Trepanel brand of wall panel I determined that the width needed was 13mm and the slat height was also 13mm. Firing up my trusty Tinkercad I made the necessary adjustments to give me the perfect fit.
I printed my parts with PETG using .2mm layer lines and the recommended 4 perimeters and 20%infill.
It all looks very robust, but will make the final versions with PLA.
As you can see from the photo it all printed perfectly and the shelf support is flush with the surface of the vertical slats.