1 / 2
Coat rack/ hanger/ Wardrobe ─ with wooden rod
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A clean, modular coat rack that combines sturdy 3D-printed parts with a round wooden rod.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
A clean, modular coat rack that combines sturdy 3D-printed parts with a round wooden rod. Available for 20 mm and 25 mm diameter rods.
Simply clamp the wooden rod in place using the set screw.
In the picture, you can see a black stained 20 mm rod.
Hardware
⌀20/25 mm wooden rod
M3 hex nut (2x)
M3 set screw (2x)
Wood screw for mounting(4x)
Print settings
4 Perimeters
20% infill
No supports needed