1 / 4
Hero Me Gen7.4 Sovol SV08 and SV08MAX backplate adapter.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a backplate adapter for the sovol SV08 and SV08 MAX.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 305
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 9)Remiksy (0)Kolekcje (10)Powiązane
Print with standard settings but my preference is that this is printed in ABS or ASA. with 50% infill.
V2 is honestly better where it has a more stable and flat profile. if you prefer V1 then this is still an option. I would recommend going with V1 if you need more clearance for a shorter hot end.