Qidi Q2 Riser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Qidi Q2 Riser adds 45 mm height, prevents PTFE tube contact and removable trays for better airflow.
- Ocena
- 4,75 / 5
- Polubienia
- 124
- Pobrania
- 1011
- Wydruki
- 4
- Wyświetlenia
- 5561
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
QIDI Q2 Riser
I redesigned the original H3D-Himon riser because the top glass wasn’t lifted high enough — the PTFE tube was still scraping against the glass.
This version increases the height by about 45 mm, giving the tube enough clearance and improving overall movement.
The design also includes six removable trays that can be taken out to improve airflow without removing the top cover.
When the trays are not needed, they can be stored neatly at the back of the riser.
📏 Print Details
Adds ~45 mm of height
Printed in PETG
3 walls
30% infill
Tree supports enabled
Support on build plate only
Support overhang angle: 29°
Print orientation: flat on the bed
No post-processing needed
Feel free to share your makes! I’d love to see how it works with your setup.