1 / 6
Fence Cup Holder - Eintracht Frankfurt — zdjęcie 1
1 / 6

Fence Cup Holder - Eintracht Frankfurt

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Foldable Cup Holder for the Fence in the Eintracht Waldstadion (and other)

Ocena
0 / 5
Polubienia
7
Pobrania
36
Wydruki
2
Wyświetlenia
425
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

When visiting football matsches of Eintracht Frankfurt in the Waldstadion I never know where to put my cup. Luckily I use to sit directly behind a fence, so I could make this to an opportunity for me. So I designed this cup holder to have my drink handy.

The design is adapted to the 0,5L cups which are served in the Waldstadion. The inner ring is conical and has a diameter of 76 - 80mm. Most of the standard cups might fit.

For transportation and storage when not in use, the cup holder is foldable. Is has some locking features to keep the cup holder closed until needed.

The fence clap is designed for a 50 x 8mm beam. This is a common shape for a fence beam, anyhow this kind of fence might not be used in every place, so I am looking forward to see your remixes.

For the improbable case that don't want to have the “Eintracht” lettering on it, I have added a neutral version of the cup holder ring without any lettering. 

Additional parts needed:

Next to the printed parts you will need:

  • M3 x 30 socket head cap screw (DIN 912 / ISO 4762)
  • M3 nut preferable with nylock

 

Print Instruction:

Layer Highth: 0,2
Infill: 15%
Supports: custom support on the fence clap part in the area of the hinge. Refer to the attached *.3mf file

I used PETG, but other materials might work, too.
 

VersionDateChange logSlicer
1.013. Oct. 2025first publishPrusaSlicer
Version 2.8.1

Tagi