1 / 4
Jaguar knee bolster upper repair clip
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this to replace the metal clips that were used on the original bolsters which apparently have become NLA. They…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
I made this to replace the metal clips that were used on the original bolsters which apparently have become NLA. They seem to be working pretty good. I used 3mm nut and a 3x6mm machine screw pan head(try to find a thin one).I printed on edge with inner and outer brim with ABS, 25%infil. I've included both the countersunk and panhead version.
Category: Other
