1 / 7
Miniature Over-Ear Headphones for Labubu - Print-in-Place & Satisfying Snap — zdjęcie 1
1 / 7

Miniature Over-Ear Headphones for Labubu - Print-in-Place & Satisfying Snap

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Miniature, print-in-place headphones with a snap-fit hinge for full rotation. Perfect accessory for Labubu's.

Ocena
5 / 5
Polubienia
63
Pobrania
621
Wydruki
2
Wyświetlenia
1678
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is my original design for Miniature Over-Ear Headphones, specifically scaled to be the perfect accessory for collectible figures like Labubu, Pop Mart, and other 1/12-scale art toys. The unique print-in-place construction means no assembly is required—just pop them off the plate, and they're ready to wear. The design features a hidden snap-fit pivot that creates a highly satisfying click/snap rotation in the earcups, making them fun to fidget with and pose.

🖨 Print Tips for the Perfect Snap

  • To ensure the print-in-place mechanism works smoothly and you get the satisfying "snap," do not use supports and ensure your printer's first layer adhesion is dialed in.

  • Tolerance: The hinge mechanism uses an engineered tolerance, so a well-calibrated printer is essential.

  • Layer Separation: Gently rotate the hinges after the print is complete to break the thin layer of adhesion. You will hear the satisfying snap when the hinge is released!

⚙ Extracted Print Settings

These settings were used to successfully print the design on a Creality Ender-3 V2 with a 0.4 mm nozzle.

Setting

Value Extracted from G-code

Notes

Print Time

1 hr 25 min 36 sec (5136 seconds)

Very quick print, ideal for batch printing accessories.

Layer Height

0.2 mm

Standard quality is fine, or try 0.16 mm for cleaner details.

Supports

None

Designed for zero supports.

Filament Used

2.87 meters

Minimal material cost.

Max Dimensions (XYZ)

104.2 x 74.1 x 8.8 mm

Very low height (8.8 mm) allows for fast printing.

Target Machine

Creality Ender-3 V2

Sliced in Cura 5.10.1.

Nozzle Temp

195∘C

Standard PLA setting.

Bed Temp

60∘C (Initial: 65∘C)

 

Tagi