Duet 3 mini 5+ Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a stand-alone casing for the Duet 3 mini 5+ controller board. It is designed to stand up vertically and has…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 93
- Wydruki
- 0
- Wyświetlenia
- 673
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a stand-alone casing for the Duet 3 mini 5+ controller board. It is designed to stand up vertically and has room for a 40x40x20 mm fan to ensure proper cooling. The fan should blow air outwards, so that cool air enters via the side-openings and passes both sides of the board.
The card exists in two versions: ethernet and wifi. Use the -box file for the ethernet version and the -wifi file for the wifi version. The lid is identical for both versions.
The case has a small slot in the back for fitting a miniature (11 mm wide) voltage step-down converter.
The board is fastened using four M4x6 screws. The lid is fastened using four M3x10 screws.
Disclaimer: I do not own this board (it is still not in production), so the details of the design are based on official photos/drawings. It is a modified version of my case for the Duet 2 Maestro (https://www.thingiverse.com/thing:4438555).
Update 2020-12-30
Position of the holes for the reset button and indicator LEDs has been updated to match the in-production version of the board.
Category: 3D Printer Parts