Hop filters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When you forgot to buy hop filter for transfering beer from fermenter to the bottles
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- GNU General Public License v2.0
Well…the day to transfer my fermented beer to the bottles has come and I realised I forgot to buy hop filter :-/
Quickly I modeled a hop filter, which is just a cylinder with a fine gyroid infill that serves as a small mesh to filter hops and small holes where you can attach some floating device.
I am adding this model as STL and also 2x 3MF versions (one just with filter bottom - modificator with 0 bottom layers and one with more filtering space - no perimeters on the sides).
I also decided to make a funnel-like filter for attaching small piece of cloth that serves as a filter. This was printed in ASA and then dropped in boiling water to sterilise it.
Although these filters worked as intended, due to food safety reasons I recommend using them as a last resort, sterilise them before use and use them only once and then discard them. Also if you decide to use them, you are doing it at your own risk.
Hopefully this will help you, if you get into the trouble as I once was.
Cheers!