Oversized Rear Roller for ACE PRO
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Scaled better for the rude individual that posted it originally, and his self-made bandwagon. Read description.
- Ocena
- 4 / 5
- Polubienia
- 18
- Pobrania
- 111
- Wydruki
- 0
- Wyświetlenia
- 462
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I use polymaker filament almost exclusively. These help. Bearings would be better. it uses the metal rod, but it was VERY loose, so i fixed that to allow it to turn freely but not flop around so much. In the image comparing the hole sizes for quick visual. Corrected is the smaller hole. (right side) Old very loose hole on the left (left side)
The Anycubic ACE has normally problems with cardboard and other smaller filament rolls. These roller replacement goes into the back of the ACE (the original ones simply pop out, you re-use the metal rod).
With these in place, I did not have a single “tangles filament” error message anymore.
There are similar ones out there that require ball bearings, mine is designed to directly go onto the rod.
I used 3-5% infill, also standard voron elsewhere and used adaptive cubic, gyroid, and honeycomb to test print.