Pedrini Moka Pot Station (2 Cup)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A moka station to hold the base and a funnel for loading the basket. Designed around 2 cup Pedrini moka pot.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 93
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I've been meaning to start learning to model for ages and finally used this to push me to do it.
I wanted something that could hold the base of my moka pot with hot water in it and let me put the coffee in the basket without making a huge mess.
Also made a standalone version of the basket funnel.
It's designed around my Pedrini 2 cup moka. Pretty rudimentary but does what I need it to do. I left a hole at the bottom of the funnel part to push up the basket when it's full. Obsiously there is much room for improvement so attached the model file.
Any material will work but if you want to use it with hot water use something with higher heat tolerance like ASA.
Printed with 0.4mm nozzle, ASA, 25% infill base and 15% infill for the rest.