1 / 3
Día de los Muertos Ofrenda – Candlelit Celebration of Remembrance — zdjęcie 1
1 / 3

Día de los Muertos Ofrenda – Candlelit Celebration of Remembrance

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A colorful Día de los Muertos altar glows with candles, papel picado, and a joyful calavera portrait in tribute.

Ocena
0 / 5
Polubienia
7
Pobrania
31
Wydruki
0
Wyświetlenia
406
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

This Día de los Muertos Hueforge piece beautifully honors the tradition of the ofrenda, featuring glowing candles, marigolds, and papel picado strung across the top. A smiling skeleton in a sombrero sits framed at the center, surrounded by bright colors symbolizing remembrance and celebration. The design captures the warmth, light, and love of Mexico’s Day of the Dead traditions—perfect for cultural displays or seasonal art collections.

Project: Day of the Dead.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.72mm
The Max Depth is 2.4mm and the Actual Depth is 2.3mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3 
PLA BambuLab Basic BambuLab Green Transmission Distance: 2 
PLA BambuLab Basic Cyan Transmission Distance: 3.5 
PLA Overture Purple Transmission Distance: 1 
PLA BambuLab Basic Red Transmission Distance: 4 
PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5 
PLA BambuLab Basic Yellow Transmission Distance: 6 
PLA BambuLab Basic Jade White Transmission Distance: 0
This print uses 8 unique filaments

Swap Instructions:
Start with Black 
At layer #12 (1.04mm) swap to BambuLab Green 
At layer #14 (1.2mm) swap to Cyan 
At layer #16 (1.36mm) swap to Purple 
At layer #18 (1.52mm) swap to Red 
At layer #21 (1.76mm) swap to Pumpkin Orange 
At layer #23 (1.92mm) swap to Yellow 
At layer #25 (2.08mm) swap to Jade White for the rest.rest.

Please note, a height modifier was applied to ensure a thicker base - this results in the layer numbers being offset by 3 layers, however the heights remain consistent.

One AMS? No problem! There is a pause included before the 4th color is completed - one method to utilize one AMS is to assign the additional colors to previously used slots when sending your print. Here is an example of my preferred method and strategy:

 

  1. Arrange the filaments in the AMS in order according to the print.
     
  2. Assign the 5th and subsequent colors to the AMS numerically.
     
  3. At the pause, replace the color in slot #1 with the 5th color, resume printing.

 

If you have more than one AMS or are manually changing filaments, 
ensure you have removed the pause before printing.

 

This print is part of a coordinated Hueforge series by Manic 3D Prints, designed to showcase a classic Halloween aesthetic using just 4–5 filament colors. Each piece in the collection features rich black, warm pumpkin orange, creamy bone white, and golden autumn tones to create a unified, vintage-inspired display. Mix and match panels for a seamless look across your tiered trays, shelves, or gallery wall this spooky season!

🎃 Halloween Hueforge Collection: Dia  De Los Muertos🎃

Want to sell your physical prints of this model? A commercial license is available through my profile.

This model was created by Manic 3D Prints using Hueforge, based on a concept and idea fully developed by us. The source image was generated with the help of online tools to bring our vision to life. The 3D model itself was entirely designed and rendered by us using Hueforge as part of our original creative process.

Tagi