Clip for Barrina LED T5 fixture
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The metal clips that come with the Barrina 4FT LED T5 Integrated Single Fixture off Amazon are very flimsy and come…
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 35
- Wydruki
- 1
- Wyświetlenia
- 133
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
The metal clips that come with the Barrina 4FT LED T5 Integrated Single Fixture off Amazon are very flimsy and come with a screw that is less than 1/2". This is not long enough to go through drywall for a long lasting connection on the garage ceiling. If you use a larger screw the head gets in the way and the clip won't catch the fixture.
I designed a new clip for drywall or deck screws and made the clip large enough to hold the ends of two fixtures when they are connected together with the included electrical connector. This clip can be used at end of a strip or between two fixtures. It does add about 4mm between the ceiling and fixture which is required for the screw head I used. You could reduce this with different screws (OpenScad script included).
The light fixtures are very light. When you install, you can start with a single clip on an end and then just add another clip at the other end between the next fixture. There is no need to measure between fixtures if you have a straight line to install on. A single screw (into wood) per clip will hold the fixture to the ceiling.
This is a simple print with nothing tricky. I printed at 50% infill in ABS. I did my test print in blue. Final prints are white to match ceiling and the fixture.
Category: Tools