Corner Framing Clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
We had some broken frames around the house which needed repair.I saw a similar clamping system and decided it would be…
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 65
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
We had some broken frames around the house which needed repair. I saw a similar clamping system and decided it would be an easy print.
This design works and I don't intend to update. If I was starting over, I would consider designing the knobs into some type of gear that I could drive with a drill since it takes a lot of turns with long threaded rod.
The printed parts are very simple, just print four of each piece. I used four pieces of 1/4"-20 threaded rod and 12 nuts. For the knobs, I heat up my capture nut and pull them into the piece. The nut internal to the corners is simply inserted.
Category: Hand Tools