Form One - Ocean Inspired Vase
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An ocean inspired vase, created in Blender
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 149
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Standard Digital File License
An ocean inspired vase, created in Blender. The settings are the closest I could get to reliable water tightness regardless of the material, but it’s hit and miss. So if you do require this to be watertight, expect to have to do some tuning and experimentation with your filament. Advice on how to get this even better is appreciated :-)
Note that the shape is quite versatile – it’s designed to still look good even if you cut off different parts of it at the top. For example, the example printed in PETG isn’t the full height of the model, to make the opening at the top larger.
Designed for spiral vase mode for filament efficiency and speed. Quite forgiving if water tightness isn’t required. My best settings so far for watertightness (not guaranteed to be watertight):
- 4 bottom shell layers
- bottom layer concentric, subsequent shell layers monotonic
- flow multiplier 1.35
- 0.8mm line width with a 0.4mm nozzle (though even wider might help)