135 (35mm film) Slide Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple printable slide holder which conforms to DIN-108. They should be compatible with any slide projector or…
- Ocena
- 5 / 5
- Polubienia
- 56
- Pobrania
- 598
- Wydruki
- 0
- Wyświetlenia
- 2792
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
A simple printable slide holder which conforms to DIN-108. They should be compatible with any slide projector or scanner. I use these slide mounts to mount difficult frames for digitizing in a Nikon Coolscan V.
Slides can get hot. If you print this in PLA you may have problems with the frame softening. Using a white or reflective filament will also help limit heating.
Remember to print twice of many of these as you have slides to mount.
Post-Printing
Assembly Instructions
These slides can be assembled by snapping the two halves together. A dab of superglue on each corner will make the frame more rigid.
Category: Camera