1 / 2
Natsu | Fairy Tail panel page (w/ HueForge) — zdjęcie 1
1 / 2

Natsu | Fairy Tail panel page (w/ HueForge)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Natsu from Fairy Tail - Original panel reproduced on “HueForge”

Ocena
0 / 5
Polubienia
2
Pobrania
18
Wydruki
0
Wyświetlenia
96
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Original manga panel by Hiro Mashima.

First model created using the “HueForge” app. I hope to share more of them with you for free in the future. I’m still getting the hang of it so I can offer images with more depth — and maybe even colors!

Print Settings

  • 100 % infill
  • Layer height: 0.08 mm
  • First layer height: 0.16 mm

Filaments

You can use regular PLA — 

  • PLA+ DEEPLEE Black 
  • PLA+ DEEPLEE Gray 
  • PLA+ DEEPLEE White 

Filament Swap

  1. Start with Black.
  2. At layer 10, switch to Gray.
  3. At layer 14, switch to White and continue until the end

 

There are a few imperfections, especially around the “To be continued” text in the bottom left corner, but that’s mostly due to my own settings. Let me know if you run into the same issue!There are a few imperfections, especially around the “To be continued” text in the bottom left corner, but that’s mostly due to my own settings. Let me know if you run into the same issue!

 

Tagi