1 / 2
Adapter between Sherwood Thicknesser and Hilti shop vac 36mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remove sawdust from Sherwood 13in Thicknesser by connecting Hilti's standard shop vacuum hose fitting
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 85
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
It press-fits onto both the hose and the dust extractor port on the Sherwood 13in Thicknesser model MBSC-1936 but may suit other models
I printed it in eSun copper silk-PLA.
You'll want to print it vertically, larger Sherwood end down which will give it good adhesion. I printed with structural preset for size accuracy, using scarf joints “everywhere” with default settings, and fuzzy skin set for outside walls with 0.3/0.3mm settings. It prints without supports.