Easy Print Tealight Ghosts With Multiple Faces
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to work well with clear AND opaque filament, these are super easy to print and come in multiple face options.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 158
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed these ghosts to print with exactly 4 walls (with a .4mm nozzle). This works really well with transparent filament for consistent, smooth backlighting and no visual artifacts. Use Arachne wall generator and set your outer walls to .45 width and inner walls to .5 width.
The eyes and mouths are separate models that can be removed if you want to print the ghosts that way (works really well with opaque filament) or if your printer does not support multi-color printing. Use “split model” to see the individual parts.
The models marked “(No Supports)" have stepped geometry inside the top of the head so that they can be printed without supports. If you have good bridging, this works really nicely. If you don't have good bridging, just turn your bridging speed way down (20-30mm/s) and max your bridging fan speed, and you'll probably be OK.
For the cleanest, smoothest see-through prints, don't use the “(No Supports)” models and use a printer that can use dissimilar material for the support interface and make your support interface distance zero. Natural PETG or PCTG with PLA supports works really well here.