Pad inflator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by the Alpenblow: https://www.alpenglowgear.co/store/p/alpenblow
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 765
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I saw the alpenblow and was curious whether it would work for me, but not curious enought to spend €60. So I made my own. It weighs 16g and takes about 3 minutes, 12mAh, and 2 extra breaths to inflate my Nemo tensor regular wide.I saw the alpenblow and was curious whether it would work for me, but not curious enought to spend €60. So I made my own. It weighs 16g and takes about 3 minutes, 12mAh, and 2 extra breaths to inflate my Nemo tensor regular wide.
Here's the fan I used, others might work as well but make sure to get one with high static pressure.
https://aliexpress.com/item/1005007929744040.html
I removed the top cover of the fan because it's function is replaced by the housing.
Added a backflow arrestor based on u/TheGrandHobo 's suggestion. Not sure whether or how much it actually helps though.
To be honest I'll still just carry my pack liner / pumpsack creation rather than the next gadget to keep track of. I had fun creating it though!