Polaris 180 Wheel Adapter to Ceramic 608 Bearings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a kit to use the Polaris 180 wheel with ceramic 608 bearings. The bearings last longer and the Plastic screw…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 253
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This is a kit to use the Polaris 180 wheel with ceramic 608 bearings. The bearings last longer and the Plastic screw that breaks off is replaced with a 10-24 1.5 in stainless screw.
Requires you to print a new bracket to hold the wheel. The bracket needs to be tapped to 10-24 thread.
The bearing spacers go between the bearings and give the screw something to tighten on, print 2 each.
Cheers
Kisssys
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
25%
Filament: Prusa abs petg your pick
Category: Replacement Parts