Tormach PCNC1100 spindle lock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this spindle lock for my Tormach PCNC1100 but haven't had a chance to use it for broaching. Ended up printing a…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 226
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I made this spindle lock for my Tormach PCNC1100 but haven't had a chance to use it for broaching. Ended up printing a plastic part and when it fails I'll probably try it out.
Yes it's plastic but it seemed pretty strong, I wouldn't think the torsional loads would be that large but I really don't know, just a gut feel. Look at the design, I've kept the 2 rings attached together except at the bolt attach point. Uses 2ea. 10-24 bolts and nuts.
Make sure you turn the Spindle Lock to 0.
Hope it's useful to someone.
Cheers
Kisssys https://www.cncbroachtools.com/
Category: Machine Tools