1 / 2
Jockey wheel scraper for Shimano 12-speed chain — zdjęcie 1
1 / 2

Jockey wheel scraper for Shimano 12-speed chain

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Quick and dirty part that makes it a bit easier to scrape off wax and/or grease from your jockey wheels

Ocena
5 / 5
Polubienia
105
Pobrania
454
Wydruki
5
Wyświetlenia
1302
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

As with most of my designs this one was created out of necessity. After washing my bike I like to get all the extra wax (I use a waxed chain) and gunk off my sprockets and jockey wheels. In the past I've used my fingernails which makes cleanup a bit of a hassle. This time I noticed the little ridge at the bottom of the teeth and figured I could pilot off that feature to run a scraping tool against it. 30 minutes later (it's about a 5-minute print) I had my tool and it worked really well! Just hold it in place and rotate the tire, and the majority of the gunk will be scraped off.

This will probably work on many other jockey wheels but it was designed specifically for Shimano 105 ( P/N RD-R7000), Ultegra and Dura-Ace. Print it in any material you want. It's about the size of a guitar pick so you may be able to scale it to fit different teeth. Let me know how it works out for you!

Edit 10/25/25: I belive this will work on any jockey wheel designed for 12-speed chain. These teeth are 2mm wide which I'm assuming is standard. Again, it's easy to scale the model if your dimensions vary.

Tagi