SpaceX Starship Blast off
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a low detail model of the SpaceX's Starship built for display
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 93
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
This is a simple low detail design modeled off of the Starship, you can print just the ship or the “liftoff explosion” too. Do note that the ship fits very tightly onto the explosion you may want to adjust the tolerances in whatever slicer you use but it does work as is.
Print Settings:
Layer height: .2 (bigger will work)
Walls: 2
Brim: yes
Supports: optional ( I used them but it will work without them it just may require some cleaning up)
Infill: 15% ( more is fine I wouldn't recommend less though)
Material:
PLA, PETG, and ABS all should work
Starship: Overture black PETG
Explosion: transparent red PETG (Idk the brand)
Thank you for taking the time to read and (hopefully) print this model if you have any problems or issues please just comment and I will try to get back to you asap. Again thanks for checking this out.