Raspberry Pi Touch Display 2 Rear Mounting Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When you have the Raspberry Pi Touch Display 2 flush mounted you can use this bracket to hold it in the back.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Use this model to mount a touch display 2 that is flush mounted. The whole in the center is for the raspberry pi that is physically mounted to the touch display 2.
I am using this mount for my custom digital dash setup. I am posting just incase someone else wanted to use it.
The side tabs will be mounted towards the display itself. I added them to compensate for the raised mounting points on the display.
I printed this with voron settings in PETG but you can print in whatever you like. I uploaded the .3mf so you can change it to your use case.
Hardware is 4 x M2.5x8mm